News

Home > News > Content
Carbon Steel Pipe Classification And Production Methods
May 26, 2017

  Carbon steel pipe sub-hot rolling and cold-rolled (pull) steel pipe two categories.

   Carbon Steel Pipe Hot-rolled carbon steel pipe in general steel, low, medium pressure boiler steel pipe, high pressure boiler steel pipe, alloy steel pipe, stainless steel pipe, oil cracking pipe, geological pipe and other steel pipe.

In addition to the general steel pipe, low pressure boiler steel pipe, high pressure boiler steel pipe, alloy steel pipe, stainless steel pipe, oil cracking pipe, other steel pipe, but also includes carbon thin-walled steel pipe, alloy thin-walled steel pipe, not Rust thin-walled steel pipe, shaped steel pipe. Hot-rolled seamless pipe diameter is generally greater than 32mm, wall thickness 2.5-75mm, cold-rolled seamless steel pipe diameter can be 6mm, wall thickness to 0.25mm, thin tube diameter to 5mm, wall thickness is less than 0.25mm, Cold rolling than the hot-rolled high dimensional accuracy.

General carbon steel pipe: is 10,20,30,35,45 and other high-quality carbon steel 16Mn, 5MnV and other low-alloy structural steel or 40Cr, 30CrMnSi, 45Mn2, 40MnB alloy steel such as hot-rolled or cold rolled. 10,20 and other low-carbon steel seamless pipe is mainly used for fluid pipeline. 45,40Cr and other carbon steel made of seamless pipe used to manufacture mechanical parts, such as cars, tractors force parts. General use of carbon steel pipe to ensure strength and flattening test. The hot-rolled steel pipe is delivered in a hot-rolled state or a heat-treated state; cold-rolled steel is delivered in a heat-treated state.

   Carbon Steel Pipe Carbon steel pipe material is round tube, round tube embryo to be cut through the cutting machine into a length of about 1 meter of the blank, and sent to the furnace by the conveyor belt heating. The billet is fed into the furnace for heating at a temperature of about 1200 ° C. The fuel is hydrogen or acetylene. Temperature control inside the furnace is a critical problem. Round tube billet after the pressure through the punching machine to wear empty. Generally more common punching machine is a cone-shaped roller punching machine, this perforation machine production efficiency, product quality, perforation expansion diameter, can wear a variety of steel. After perforation, round tube billet has been three roll chrome, rolling or extrusion. After the extrusion to be detached. The sizing machine is rotated at high speed through the conical bit into the steel embryo to perforate to form the steel pipe. The inner diameter of the pipe is determined by the length of the outer diameter of the drill bit. After passing through the steel pipe, into the cooling tower, through the water cooling, steel pipe after cooling, it is necessary to straighten. After the steel pipe straightened by the conveyor belt sent to the metal testing machine (or water pressure test) for internal testing. If the steel pipe cracks, bubbles and other issues, will be detected. After the steel pipe quality inspection through rigorous hand selection. After the steel pipe quality inspection, with paint spray on the number, specifications, production batch number. And hanging from the crane into the warehouse.





Copyright © Jiangsu Jinguan Special Steel Pipe Co. Ltd. All rights reserved.Tel: +86-510-8358 6478