News

Home > News > Content
Stainless Steel Elbows And Bends The Main Difference
Dec 05, 2016

Stainless steel elbows and bends the most basic difference is that stainless steel elbow pipe for short. R=1 to twice times are elbows, multiples of the big bend. In the production process cold-formed tubes can be used out of the box straight pipe Bender bending, a one-time completion without secondary corrosion.

Elbow to the manufacturers custom-made, anti-corrosion, order cycle is long. Elbow than bend to high but the price is much higher than the elbow, is no easy damage of bend pipe anti-corrosion process Office is well known, but its because they are inexpensive in so many project requirements are not very high.

Elbow to the manufacturers custom-made, anti-corrosion, order cycle is long. Cold-formed tubes can be used out of the box straight pipe Bender bending. One-time completed without secondary corrosion. Construction technology of cold-formed tubes have a oil standards, standards of West-East gas pipeline companies.

But open with elbows bent pipe line, only consider cost, elbow needs heating, bending cold bending can, of course, is elbow high cost. Narrow lots must sometimes use elbow, as rock above trench, bend radius of curvature is small, typically 6 d, elbow 40D.




Copyright © Jiangsu Jinguan Special Steel Pipe Co. Ltd. All rights reserved.Tel: +86-510-8358 6478